当前位置: 网站首页 > 新闻资讯 > 行业资讯
  • 钢衬塑储罐如何检修?
  • 本站编辑:浙江南化防腐设备有限公司发布日期:2018-08-21 16:30 浏览次数:

钢衬塑储罐

钢衬塑储罐具有无焊接缝、不渗漏、无毒性、抗老化、抗冲击、耐腐蚀、寿命长、符合卫生标准等优点。与传统的钢衬塑料板储槽、钢衬橡胶储罐、钢衬玻璃钢贮槽相比,具有更良好的耐腐蚀、不渗漏、不剥离、耐磨损、可耐一定压力、可耐较高温度、寿命更长等优点。
The steel lined plastic tank has the advantages of no weld seam, no leakage, non-toxicity, anti-aging, anti-impact, anti-corrosion, long service life, and meeting the hygienic standards. Compared with the traditional steel lined plastic plate tank, steel lined rubber tank, steel lined FRP tank, it has better corrosion resistance, no leakage, no peeling, wear resistance, can withstand certain pressure, can withstand higher temperature, longer life and so on.
钢衬塑储罐检修周期分为两种:中修和大修,中修一般是2-4个月,大修一般是一年,对于中修的话,就是清洗或更换液位计修理或更换进、出口及排污阀门疏通清理冷却水盘管。检查修理安全阀放空阻火器,修补防腐层和绝热层。大修就包括中修项目修理储罐内件,对发现有裂纹,严重腐蚀等部位,相应修补或更换筒节。根据内外部检验要求,以及经过修补或更换筒节后,进行试漏,对成功内外部检验中发现的其他问题进行处理。
Maintenance cycle of steel lined plastic tank is divided into two kinds: intermediate repair and overhaul, intermediate repair is generally 2-4 months, overhaul is generally a year, for intermediate repair, is to clean or replace the level meter repair or replacement of import, export and sewage valve to clear the cooling water coil. Check and repair the relief valve, release the flame arrester, repair the anticorrosive coating and heat insulation layer. Major repairs include repairing tank internals in intermediate repair projects, and repairing or replacing barrel sections where cracks and serious corrosion are found. According to the internal and external inspection requirements, and after repairing or replacing the barrel section, carry out leak testing, and deal with other problems found in the successful internal and external inspection.